| |
Door
Closer & Fax Support 1
2
Thank you for your pruchasing BMQ2000 door closer. BMQ2000 door
closer specially designed for the use of home and public doors instead
of mechanical springs.the main part of the closer is a gas spring
charged with nitrogen and oil. Over 100000 cycles wording life and
streamline designed outline accord very much with modern upholster.
You even need not adjust anything before use after correct installation.
If the door opening angle is over 85,The door is in self-locked status,
otherwise the door wil be closing slowly if the angle si less 85,
and will close slower till the angle is 20 to 25. You will find the
door will be close more gently. The maximum opening angle is 100 after
using BMQ2000 door closer.
To avoid failure of using BMQ2000 door closer, please confirm the
opening direction of your (see Grap.1,left opening or right opening.)
Please follow the instruction carefully wyhe installation.
>INSTALLATION INSTRUCTION:
1.Unload the fix screw, and move gently the cover.
2.Fix gas spring bracket to the right place of the door with 4 screws.
3.Fix Pin bracket assembly to the door frame and pin must be in the
grove of connection bar. the installation dimension showed.or install
assisted by chipboard with installation size as shown on separated
drawing.
Thank you for your pruchasing BMQ2000 door closer. BMQ2000 door closer
specially designed for the use of home and public doors instead of
mechanical springs.the main part of the closer is a gas spring charged
with nitrogen and oil. Over 100000 cycles wording life and streamline
designed outline accord very much with modern upholster. You even
need not adjust anything before use after correct installation.
If the door opening angle is over 85,The door is in self-locked status,
otherwise the door wil be closing slowly if the angle si less 85,
and will close slower till the angle is 20 to 25. You will find the
door will be close more gently. The maximum opening angle is 100 after
using BMQ2000 door closer.
To avoid failure of using BMQ2000 door closer, please confirm the
opening direction of your (left opening or right opening.) Please
follow the instruction carefully wyhe installation.
INSTALLATION INSTRUCTION:
1.Unload the fix screw, and move gently the cover.
2.Fix gas spring bracket to the right place of the door with 4 screws.
3.Fix Pin bracket assembly to the door frame and pin must be in the
grove of connection bar. the installation dimension showed.or install
assisted by chipboard with installation size as shown on separated
drawing. |
|
